The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X70-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 70mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X70-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. The integrated rear stopper allows you to dial back the 70mm nominal stroke by up to 20mm, creating a precise 50-70mm usable travel window for fine end-position tuning.
This adjuster acts purely as a travel stop to set the retract end position, not as a lock, meaning live air pressure is required to hold the load. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches, though this non-magnet SKU requires a separate -S variant for that capability. It uses a PT tapered port thread and standard carbon steel rod.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X70-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within a 50-70mm window during commissioning without needing external stopper blocks.
Quickly adjust the travel end-point to accommodate slight product size variations on a shared production line.
If you need less force, the 40mm bore offers 628N; if your application demands more, step up to the 63mm bore providing 1559N. The adjustable rear screw lets you fine-tune the retract position at commissioning without swapping the cylinder or bolting on external stops, unlike a fixed-stroke SAI model.
For ISO 15552 interchangeability, match the 50mm bore, 70mm stroke, 20mm adjustment, PT port, and mounting from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the 70mm stroke is short, side-load risks are minimal, but always ensure the load is guided to prevent rod binding. For load-holding without continuous air pressure, look to the SAIL or BSAI series instead of relying on the adjuster.
Quick checklist
The rear adjuster screw acts as an external stopper that lets you shorten the effective stroke by up to 20mm. This creates a usable travel window of 50-70mm from the 70mm nominal stroke, allowing fine-tuning at commissioning. It only sets the travel end and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.