verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X70-30

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X70-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 70mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke70 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$85.11 $92.61Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X70-30

The AirTAC SAIJ50X70-30 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 70 mm stroke that can be fine-tuned down by up to 30 mm, yielding a usable travel window of 40 to 70 mm.

This adjustable-stroke design allows you to dial in the retract position at commissioning without swapping hardware or adding external stops. The extruded aluminum barrel features sensor grooves on both sides for flexible switch placement. It uses a standard carbon steel piston rod and PT tapered port threads, while the rear adjuster acts purely as a travel stop, meaning it will not hold a load without continuous live air pressure.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X70-30 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X70-30
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke70 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X70-30

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×70Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X70-30 Is Used

tune

Product Changeovers

Dial in the 40 to 70 mm travel window during format changes on packaging lines, accommodating different carton depths without changing the cylinder.

precision_manufacturing

End-Stop Calibration

Fine-tune the retract position during machine commissioning to achieve exact sensor alignment and mechanical seating without external shims.

conveyor_belt

Variable Diverter Stops

Adjust the stroke on the fly for pneumatic diverters that must handle varying package sizes on a single conveyor belt.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X70-30 the Right Cylinder?

An adjustable stroke is favored over a fixed SAI cylinder when machine changeovers demand variable end-stops without mechanical rebuilds. To replace an ISO 15552 cylinder, match the 50 mm bore, 70 mm stroke, 30 mm adjustment, G1/4 port, and your required mounting (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Because the stroke is under 300 mm, side-load stress on the 20 mm rod is minimal, though external guiding remains best practice for heavy lateral loads. For load-holding without air pressure, select a SAIL or BSAI cylinder instead, as this adjuster is not a lock.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X70-30 FAQ

At 0.7 MPa, the push force increases to 1374 N.

The rear adjuster screw lets you shorten the 70 mm nominal stroke by up to 30 mm, creating a usable travel window of 40 to 70 mm. It functions as a mechanical stop and does not lock the load without live air.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X70-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X70-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.