The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X70-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 70mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X70-40 is a double-acting, double-rod profile cylinder with a rear stroke adjuster, dimensionally interchangeable per ISO 15552. It features a 50mm bore and a 70mm nominal stroke, but the external rear adjusting screw allows you to dial back the travel by up to 40mm. This creates a highly flexible 30-70mm usable travel window, letting you fine-tune the retract end-position at commissioning without swapping out the cylinder or adding external stops.
The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE reed or DMSE electronic switches, though this specific SKU ships without a magnet. The rear adjuster acts purely as a mechanical stop to set deceleration and end-position, meaning it will not hold a load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X70-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 30-70mm retract position when switching a packaging line to a different product size, eliminating the need to physically swap cylinders.
Fine-tune the final end-position during commissioning to perfect a pressing or clamping operation without machining custom external spacers.
Choose this 50mm bore cylinder when an application requires precise end-position tuning within a 30-70mm travel window. If you need less force, stepping down to a 40mm bore drops the 0.5MPa push force to 628N, while stepping up to a 63mm bore increases it to 1559N. The adjustable stroke is ideal for product changeovers on a line where the exact retract distance varies slightly, replacing the need to stock multiple fixed-stroke SAI cylinders.
When specifying a replacement, match the 50mm bore, 70mm stroke, 40mm adjustment range, PT tapered port threads, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the standard rod material is carbon steel, consider SUS420J2 or SUS304 alternatives for corrosive environments. Remember that the rear adjuster is a travel stop, not a lock; for load-holding without live pressure, look to the SAIL or BSAI series.
Quick checklist
At the maximum 1.0MPa pressure, it can deliver up to 200kgf.
The SAIJ50X70-40 has a nominal 70mm stroke, but the rear adjusting screw allows you to shorten the effective travel by up to 40mm. This creates a usable travel window of 30-70mm, acting as a mechanical stop to set the end-position without locking the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.