
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X70-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 70mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X70-40-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster.
This carbon-rod unit includes a magnet for CMSE reed and DMSE electronic sensors. It uses PT tapered G1/4 ports and air cushions at both ends to decelerate the load. The rear adjuster acts purely as a travel stop and does not hold position without live air.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X70-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 30-70mm travel window during setup to perfect end-of-stroke positioning without adding external stops.
Quickly adapt the stroke length on automated lines when handling slightly different product sizes.
Choose this 50mm bore when you need more thrust than the 40mm class (628N at 0.5MPa) but want a smaller footprint than the 63mm class (1559N at 0.5MPa). The 40mm adjustment range is ideal for product changeovers where end-position fine-tuning is required without swapping cylinders. For load-holding without live air, use a SAIL or BSAI cylinder instead. To match this ISO 15552 replacement: 50mm bore, 70mm stroke, 40mm adjust, PT ports, Basic/FA/LB/TC/FTC/TCM1/TCM2 mounts, and -S magnet.
Quick checklist
The rear adjuster screw lets you shorten the 70mm nominal stroke by up to 40mm, creating a usable travel window of 30-70mm. This stopper fine-tunes the retract end position but does not lock the load without live air pressure.
At 0.7MPa the push force increases to 1374N. The maximum operating pressure is 1.0MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.