
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X700-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 700mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X700-20 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. This built-in adjustability enables fine end-position tuning at commissioning without adding external stops.
Unlike a fixed-stroke SAI, this model uses a rear stopper screw to set the retract end position. The adjuster acts purely as a travel stop and does not hold the load without live air pressure. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE solid-state switches if a magnet is specified later.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X700-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 680-700 mm end position during product size transitions without replacing the cylinder or adding external stops.
Adjust the travel end on packaging lines to accommodate different carton sizes while maintaining standard ISO 15552 mounting dimensions.
If you need less force, stepping down to a 40 mm bore yields 628N; stepping up to a 63 mm bore provides 1559N. Because the nominal stroke is 700 mm, an external guide is recommended to prevent excessive side-loading on the 20 mm rod and M16x1.5 thread.
The adjustable stroke is ideal for product-size changeovers on a line, letting operators dial in the exact 680-700 mm position without swapping the cylinder. For applications requiring true load-holding without live air, consider the SAIL or BSAI locking cylinders instead. This SAIJ variant uses a PT tapered port and supports the reduced mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
The nominal stroke is 700 mm, but the rear adjuster allows you to shorten the effective travel by up to 20 mm, providing a usable window of 680 to 700 mm.
At 0.7 MPa, the push force increases to 1374N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.