verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X700-30

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X700-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 700mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke700 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$157.22 $164.72Save 4% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X700-30

The AirTAC SAIJ50X700-30 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 700 mm stroke that can be fine-tuned backward by up to 30 mm, creating a precise 670-700 mm usable travel window.

This adjustable-stroke design allows you to dial in the retract end position during commissioning without swapping the cylinder or adding external stops. The extruded aluminum barrel features sensor grooves on both sides, ready for CMSE or DMSE switches if a magnet is added later. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X700-30 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X700-30
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke700 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X700-30

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×700Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X700-30 Is Used

tune

Product Changeovers

Adjust the retract position by up to 30 mm to accommodate different product lengths on the same line without changing tooling.

precision_manufacturing

Machine Setup

Fine-tune the 700 mm stroke end-position during commissioning to achieve exact alignment without adding external shims.

conveyor_belt

Variable End Stops

Dial in the 670-700 mm travel window for diverting or positioning items of varying sizes on a conveyor.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X700-30 the Right Cylinder?

The 30 mm adjustment range is perfect for product changeovers, letting you shift the end-stop by up to 30 mm rather than machining new hard stops. For load-holding without live air pressure, this cylinder is not suitable; consider an AirTAC SAIL or BSAI series instead.

When replacing an ISO 15552 cylinder, match the 50 mm bore, 700 mm stroke, 30 mm adjustment, G1/4 PT ports, and your required mounting set (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Because the stroke is 700 mm, the 20 mm rod needs external guidance to prevent excessive side-loading and premature seal wear. Standard variable air cushions at both ends manage deceleration, but the rear stopper itself is not a brake.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X700-30 FAQ

At 0.7 MPa, the push force increases to 1374 N.

The rear adjuster screw allows you to shorten the effective stroke by up to 30 mm from the 700 mm nominal length, giving a usable travel window of 670-700 mm. It acts as a mechanical stop and does not lock the load.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X700-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X700-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.