
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X700-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 700mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X700-30-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to fine-tune the effective travel to a precise 670-700 mm window. The integrated magnet enables position feedback via CMSE reed or DMSE solid-state sensors mounted in the dual-side extruded barrel grooves.
This model uses a standard carbon steel piston rod with an M16x1.5 thread and PT tapered port connections. The rear stopper screw lets you dial in the retract end position during commissioning without swapping hardware. Remember that this adjuster acts purely as a travel stop and does not hold the load without live air pressure; for true dead-air locking, consider the SAIL or BSAI series.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X700-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Shift the 670-700 mm travel window during format changeovers to accommodate different package sizes without physically replacing the cylinder.
Use the 30 mm rear adjuster to fine-tune the exact retract position during machine setup, avoiding the need for external mechanical stops.
The 30 mm adjustment range is ideal for product changeovers on a line, letting you shift the end-stop by up to 30 mm rather than installing a fixed-stroke SAI cylinder. As an ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders via standard mounting interfaces like Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Because the 700 mm stroke is substantial, the 20 mm rod should be paired with an external guide to prevent excessive side-loading and premature seal wear. This SKU includes a magnet (-S) for CMSE/DMSE sensors and uses PT tapered G1/4 ports.
Quick checklist
The rear adjuster allows you to shorten the 700 mm nominal stroke by up to 30 mm, creating a usable travel window of 670-700 mm. This stopper only sets the end position; it does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.