
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X700-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 700mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X700-40 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 660 to 700 mm usable travel window, allowing you to dial back the nominal 700 mm stroke by up to 40 mm during commissioning.
Equipped with a 20 mm carbon steel rod and an M16x1.5 thread, it handles operational side loads effectively, though a 700 mm stroke warrants an external guide to prevent rod deflection. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches. It uses a PT tapered G1/4 port and supports the SAIJ mounting subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X700-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 660-700 mm end-stop precisely when switching product sizes on a packaging line, avoiding mechanical rebuilds.
Set the exact retraction point for a sorting pusher, fine-tuning the 700 mm travel to accommodate varying pallet depths.
Use the 40 mm rear adjustment window to perfectly time the end-of-stroke position during initial equipment commissioning.
The 40 mm adjustment range is perfect for product changeovers, letting you fine-tune the end position without swapping the cylinder or adding external stops. Unlike a fixed SAI cylinder, this rear screw mechanism allows rapid setup changes on the fly.
Remember that the rear adjuster acts only as a travel stop, not a lock; the SAIJ50X700-40 will not hold a load without live air pressure. For fail-safe load holding, consider the SAIL or BSAI series. As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders. For a direct replacement, match the 50 mm bore, 700 mm stroke, 40 mm adjuster, PT G1/4 port, and your required mounting style.
Quick checklist
It features a rear adjusting screw that lets you shorten the effective stroke by up to 40 mm, creating a 660 to 700 mm usable travel window. The adjuster acts as a mechanical stop to set the end position and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.