The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X700-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 700mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X700-40-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, enabling you to dial back the nominal 700 mm travel to establish a precise 660-700 mm usable window. Because this is an adjustable-stroke variant, you can fine-tune the retract end-position during commissioning without swapping out the entire cylinder or fabricating external stops.
This -S configuration includes a standard magnet for position sensing, interfacing directly with AirTAC CMSE reed and DMSE solid-state switches housed in the dual-side sensor grooves of the extruded aluminum barrel. The rear adjuster functions purely as a travel stop to set the end-position and relies on the integrated variable air cushions to decelerate the load; it is not a locking mechanism and will not hold a load without continuous live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X700-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 660-700 mm end-stop during product size transitions without physically replacing the actuator or adding spacer blocks.
Achieve exact retract positions during commissioning by using the rear stopper to absorb mechanical tolerances in the fixture.
Adjust the retract distance on a conveyor diverter to handle different package lengths on the fly.
Choose this 50 mm bore when an application requires more thrust than the 40 mm bore (628 N at 0.5 MPa) but does not warrant the larger 63 mm bore (1559 N at 0.5 MPa). The 40 mm adjustable range is ideal for product changeovers on a line, allowing operators to modify the end-stop without replacing the actuator. If your machine requires true load-holding without live air, a standard SAIJ will not suffice; you should instead explore the SAIL (air-released lock) or BSAI (clamp-lock) variants.
For an exact ISO 15552 replacement, match the 50 mm bore, 700 mm stroke, 40 mm adjustment, PT tapered port threads, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 interfaces, omitting FB, CA, CB, and CR. Because the stroke is 700 mm, the 20 mm rod with an M16x1.5 thread will experience amplified leverage on any side-load; an external guide rail is strongly recommended to prevent premature seal wear.
Quick checklist
At the maximum 1.0 MPa, it can generate up to 200 kgf.
The rear adjuster acts as a mechanical stop that lets you shorten the 700 mm nominal stroke by up to 40 mm, creating a 660-700 mm usable travel window. It sets the end-position but does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.