The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X700-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 700mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X700-75-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. The built-in rear stopper provides a usable travel window of 625 to 700 mm, allowing precise end-position tuning during commissioning without swapping out the entire actuator.
This -S variant includes a magnet for position sensing via AirTAC CMSE reed or DMSE electronic switches fitted into the dual-side sensor grooves on the extruded aluminum barrel. It uses a G1/4 port and a 20 mm carbon steel rod with an M16x1.5 thread. The mounting set covers Basic, FA, LB, TC, FTC, TCM1, and TCM2, intentionally omitting FB, CA, CB, and CR brackets.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X700-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 625 to 700 mm travel window on the fly when adapting a conveyor line to different product lengths without disassembling the actuator.
Fine-tune the retract end-position during machine commissioning to achieve exact clamping or placement without adding external physical stops.
Adjust the effective stroke by up to 75 mm to push varying box sizes off a belt, ensuring gentle contact without repositioning the cylinder.
If you need less force, the 40 mm bore offers 628 N; if you need more, the 63 mm bore provides 1559 N. For any fixed-position requirement that never changes, a standard SAI cylinder suffices, but the SAIJ rear screw is a travel stop, not a lock. To hold a load securely without live air pressure, select a SAIL or BSAI cylinder instead.
Because the 700 mm stroke is long and the 20 mm rod is unsupported over much of its length, adding an external guide rail is highly recommended to prevent excessive side-loading and rod bending. To match this ISO 15552 interchangeable profile, specify: 50 mm bore, 700 mm stroke, 75 mm adjustment, PT tapered G1/4 port, the reduced mounting set, and the -S magnet option.
Quick checklist
The rear adjuster screw acts as a mechanical stop that lets you shorten the 700 mm nominal stroke by up to 75 mm, providing a usable travel window of 625 to 700 mm. It only sets the travel end and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.