
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X75-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 75mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X75-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 75 mm nominal stroke that can be fine-tuned down by up to 10 mm, creating a precise 65-75 mm usable travel window.
This model utilizes PT tapered port threads (G1/4) and integrates variable air cushions at both ends to decelerate the load smoothly. The rear adjuster acts strictly as a travel stop for end-position tuning rather than a load lock, meaning live air pressure is required to maintain position. For applications needing true load-holding without air, consider the SAIL or BSAI variants.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X75-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 65-75 mm travel window during format size changes on a packaging line, using the rear screw to set the exact extended position without swapping hardware.
Fine-tune the final resting position of a tooling head during machine commissioning to achieve precise contact alignment without machining custom spacers.
Adjust the retract stop slightly to accommodate different material thicknesses in a clamping station while maintaining 982 N of consistent clamping force.
If your setup demands less force, stepping down to a 40 mm bore yields 628 N; if you need more clamping power, a 63 mm bore provides 1559 N. The adjustable stroke is ideal for machine changeovers, allowing you to dial in the 65-75 mm window on the fly instead of swapping cylinders.
To match this cylinder exactly for an ISO 15552 replacement, confirm the 50 mm bore, 75 mm stroke, 10 mm adjustment range, PT port threads, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. Since the stroke is under 300 mm, side-load stress on the 20 mm rod is minimal, though external guides are still recommended for heavy lateral loads.
Quick checklist
At a maximum 1.0 MPa, it can deliver up to 200 kgf.
The rear adjuster screw allows you to shorten the 75 mm nominal stroke by up to 10 mm, providing a usable travel range of 65 to 75 mm. It functions as a mechanical stop for position tuning and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.