
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X75-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 75mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X75-20 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 75 mm stroke that can be dialed back by up to 20 mm, giving operators a precise 55-75 mm usable travel window for commissioning.
This extruded aluminum barrel features sensor grooves on both sides for flexible switch mounting. The carbon steel piston rod utilizes an M16x1.5 thread, and the rear adjuster functions strictly as a mechanical stop for end-position tuning rather than a load-holding lock. It supports a standard operating speed of 30-800 mm/s and uses G1/4 PT threaded ports.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X75-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 55-75 mm retract distance during product size changes without swapping out the entire cylinder or repositioning hard stops.
Fine-tune the final resting position of tooling at commissioning to absorb mechanical tolerances and achieve exact alignment.
Adjust the stroke length on a sorting diverter arm on the fly to accommodate different package sizes moving down the line.
Choose the SAIJ adjustable format over a fixed SAI cylinder when you anticipate product changeovers or need to fine-tune the retract position without adding external stops. For exact ISO 15552 replacement matching, verify the 75 mm stroke, 20 mm adjustment range, G1/4 port, and mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Because this unit lacks the -S magnet option, it will not trigger AirTAC CMSE reed or DMSE electronic sensors. Remember that the rear adjuster only sets the travel end; to hold a load securely without live air pressure, consider an AirTAC SAIL or BSAI lock cylinder.
Quick checklist
If you increase the pressure to 0.7 MPa, the push force rises to 1374 N.
The rear adjuster screw acts as a mechanical stop that lets you shorten the nominal 75 mm stroke by up to 20 mm, creating a 55-75 mm usable travel window. It only sets the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.