
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X75-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 75mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X75-40-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the travel by up to 40 mm. This yields a usable stroke window of 35 to 75 mm, providing exact end-position tuning during commissioning without swapping out the barrel.
This variant features a carbon steel piston rod with an M16x1.5 thread, offering robust resistance to side loads, and includes a magnetic piston (-S) for position sensing. The extruded aluminum barrel integrates sensor grooves on both sides, accepting AirTAC CMSE reed and DMSE electronic solid-state switches. It uses a PT tapered port thread and supports the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X75-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 35-75 mm travel distance on the fly when switching between product sizes on a packaging line, eliminating the need to physically swap cylinders or bolt on external stops.
Fine-tune the retract position during machine commissioning to perfect a pressing or clamping operation, using the built-in rear screw to absorb mechanical tolerances.
Provide an adjustable physical stop for an assembly fixture, allowing operators to quickly reconfigure the end-of-stroke position for different workpiece heights.
Select this 50 mm bore adjustable cylinder when your machine setup requires variable end stops or frequent product changeovers, rather than relying on a fixed-stroke SAI cylinder. If your application demands less force, stepping down to a 40 mm bore provides 628 N at 0.5 MPa; if you need more clamping power, moving up to a 63 mm bore yields 1559 N.
Keep in mind that the rear adjuster acts purely as a mechanical travel stop to decelerate the load alongside the air cushions, and it will not hold the load safely without live air pressure. For true load-holding requirements without continuous air, consider an external pilot-operated check valve, or explore the SAIL (air-released lock) and BSAI (clamp-lock) variants. To match this ISO 15552 footprint for replacement, confirm the 50 mm bore, 75 mm nominal stroke, 40 mm adjustment, PT G1/4 port, and the -S magnet option.
Quick checklist
The rear adjuster screw lets you shorten the effective stroke by up to 40 mm from the nominal 75 mm, creating a usable travel window of 35 to 75 mm. This allows precise end-position tuning at commissioning without changing the cylinder.
At the maximum 1.0 MPa pressure, it can deliver up to 200 kgf.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.