
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X75-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 75mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X75-50 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 75 mm travel by up to 50 mm. This yields a highly flexible 25-75 mm usable travel window, perfect for machines that frequently process different part sizes.
The extruded aluminum barrel features sensor grooves on both sides, ready to accept CMSE reed or DMSE electronic switches if a magnet is specified later. This model uses a standard carbon steel piston rod with an M16x1.5 thread, and its PT tapered porting matches the G1/4 standard for this bore size. The rear stopper simply sets the end position; it does not lock the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X75-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reconfigure the 25-75 mm travel window on packaging lines when switching between different carton or product sizes.
Fine-tune the exact end-of-stroke position during machine setup without machining new spacer blocks or buying a different cylinder.
Dial in the precise clamping depth on light assembly presses where the material thickness frequently varies.
The adjustable stroke is ideal for fine-tuning end positions during commissioning or product changeovers without swapping out the entire cylinder or adding external mechanical stops. If your setup requires holding a load securely without continuous air pressure, you will need an external rod lock or a different series like the SAIL or BSAI.
To replace an ISO 15552 cylinder, match the 50 mm bore, 75 mm nominal stroke, 50 mm adjustment range, PT port threads, and your preferred mounting bracket. SAIJ supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, but omits FB, CA, CB, and CR options. The standard speed range is 30-800 mm/s.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 200 kgf.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 75 mm nominal stroke by up to 50 mm. This creates a usable travel window of 25 to 75 mm, though it only stops the piston and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.