
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X75-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 75mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X75-75-S is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. The defining feature of this SKU is its maximum 75mm adjustment range, which allows you to dial the effective travel down from 75mm all the way to a zero-stroke position. This extreme adjustability eliminates the need to stock multiple cylinder lengths for prototype tooling or short-travel clamping setups.
Because this is an -S variant, the extruded aluminum barrel includes a magnet for position sensing with AirTAC CMSE reed and DMSE electronic switches seated in the dual-side sensor grooves. The rear adjuster acts purely as a mechanical stop to set the end position and relies on the integrated air cushions for deceleration; it is not a locking device. For applications that require true load holding without continuous air pressure, you should use an SAIL air-released lock cylinder or an external rod lock.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X75-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-stop position when switching production lines to a new product size, using the full 0-75mm window to adapt travel without changing hardware.
Set precise, repeatable clamping or positioning distances during commissioning, relying on the rear screw to trim the 75mm stroke exactly to the process requirement.
Accommodate evolving travel requirements in short-stroke test fixtures by adjusting the travel window on the fly rather than machining new stop blocks for each iteration.
The 75mm adjustment window is ideal for machine changeovers where the exact end-of-stroke position varies by product size, allowing operators to fine-tune the travel without swapping the cylinder or adding external stops. If you need a fixed 75mm stroke without the adjustment mechanism, the standard SAI series is the direct alternative.
When configuring your ISO 15552 replacement, verify the 75mm adjustment code, G1/4 PT ports, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 interfaces, omitting FB, CA, CB, and CR. The 20mm rod with an M16x1.5 thread handles moderate side loads well, though long unsupported strokes still require an external guide.
Quick checklist
If operated at 0.7 MPa, the push force increases to 1374N.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective travel from 75mm down to 0mm. It sets the end position and relies on the air cushion for deceleration, but it does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.