
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X80-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 80mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X80-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. By turning the rear screw, you can trim the nominal 80 mm stroke back by up to 10 mm, creating a precise 70-80 mm usable travel window for commissioning without adding external stops.
This extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches if a magnet is added later. The carbon steel rod with an M16x1.5 thread handles side loads well, while the mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-of-stroke position during machine commissioning, trimming up to 10 mm off the 80 mm stroke to perfect the dwell time without machining external stopper blocks.
Quickly adapt a packaging line to a slightly shorter product variant by adjusting the rear screw, shifting the effective travel window from 80 mm down to 70 mm in seconds.
Achieve precise mechanical end-position tuning on automated assembly equipment where a fixed 80 mm stroke would crash the tooling, using the built-in stopper to set the exact 70-80 mm reach.
The adjustable stroke is ideal for product changeovers, letting you fine-tune the end position on the fly instead of swapping a fixed-stroke SAI cylinder. When matching an ISO 15552 replacement, verify the 80 mm stroke, 10 mm adjuster, PT tapered port, and mounting style.
Because the stroke is under 300 mm, side-load stress is minimal, though long unsupported loads still need an external guide. Remember that the rear adjuster acts only as a travel stop for the air cushion to decelerate the load; it does not hold the load without live air. For true position holding without pressure, use an SAIL or BSAI cylinder.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 200 kgf.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke from its nominal 80 mm down to as little as 70 mm. This creates a 70-80 mm usable travel window for fine-tuning end positions at commissioning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.