verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-10S

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X80-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 80mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke80 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$91.88 $99.38Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-10S

The AirTAC SAIJ50X80-10-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. The built-in -S magnet enables position detection using CMSE reed or DMSE electronic sensors along the dual-side barrel grooves. Equipped with a standard carbon steel piston rod and PT tapered port threads, it ensures robust operation.

This model provides an 80mm nominal stroke that can be mechanically fine-tuned down by up to 10mm, creating a precise 70-80mm usable travel window. The rear adjustment screw acts purely as a mechanical stop to dial in end positions during commissioning without adding external stops. It is not a locking mechanism, so live air is required to hold the load.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-10S Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X80-10S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke80 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-10S

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×80Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-10S Is Used

tune

Commissioning Tuning

Fine-tune the 70-80mm travel window during machine setup to dial in exact end positions without swapping cylinders.

settings_input_component

Product Changeover

Quickly adjust the rear stopper on the line when product sizes change, saving downtime on physical modifications.

precision_manufacturing

Variable End Stops

Set precise retract positions for assembly tasks requiring strict end-of-stroke variance control.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-10S the Right Cylinder?

The adjustable 70-80mm travel window is ideal for product changeovers where exact end-of-stroke positioning varies slightly. For fixed travel without adjustment, use the standard SAI cylinder.

This SAIJ model uses a reduced mounting accessory set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets. Because it is dimensionally interchangeable per ISO 15552, it directly matches other ISO 15552 cylinders using the 50mm bore, 80mm stroke, PT port, and -S magnet specifications. For load-holding without air pressure, select the SAIL or BSAI series instead.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-10S FAQ

At the maximum 1.0 MPa pressure, it delivers up to 200 kgf.

The rear adjuster screw lets you mechanically shorten the 80mm nominal stroke by up to 10mm, providing a 70-80mm usable travel window. It functions as a hard stop for end-position tuning and does not lock the load.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-10S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X80-10S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.