verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-20

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X80-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 80mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke80 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$88.16 $95.66Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-20

The AirTAC SAIJ50X80-20 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 60-80 mm usable travel window, allowing you to dial back the 80 mm nominal stroke by up to 20 mm during commissioning without adding external stops.

This extruded aluminum body includes sensor grooves on both sides for CMSE reed or DMSE electronic switches. The carbon steel piston rod and M16x1.5 rod thread provide robust side-load resistance, while the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) omits the FB, CA, CB and CR brackets found on standard variants.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-20 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X80-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke80 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-20

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×80Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-20 Is Used

tune

Machine Changeover

Dial in the exact retract position within the 60-80 mm window when switching product sizes on a packaging line, eliminating the need to physically swap cylinders.

precision_manufacturing

End-Stop Tuning

Fine-tune the final end-position at machine commissioning to hit a precise datum, using the 20 mm rear adjustment screw rather than machining external stopper blocks.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-20 the Right Cylinder?

The adjustable rear stopper is ideal for product changeovers on a line, letting you fine-tune the retract end-position in seconds rather than swapping the cylinder. The PT tapered port threads match standard pneumatic fittings.

Because the rear adjuster acts only as a mechanical stop and the air cushions handle deceleration, this cylinder will not hold a load without live air pressure. For fail-safe load holding, select an AirTAC SAIL or BSAI series cylinder instead. Mounting is dimensionally interchangeable per ISO 15552.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-20 FAQ

It features an external adjusting screw at the rear that acts as a mechanical stop. For this model, you can shorten the effective 80 mm stroke by up to 20 mm, giving a usable travel window of 60 to 80 mm. The adjuster sets the travel end but does not lock the load without live air pressure.

If you increase the pressure to 0.7 MPa, the push force rises to 1374 N.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X80-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.