verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-20S

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X80-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 80mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke80 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$91.88 $99.38Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-20S

The AirTAC SAIJ50X80-20-S is a double-acting, double-rod ISO 15552 profile cylinder with a rear stroke adjuster. The extruded aluminum barrel includes sensor grooves on both sides, and this -S variant includes a magnet for position detection.

Equipped with a 20mm rod and M16x1.5 thread, this unit handles side loads effectively for its size. It uses PT tapered port threads and supports AirTAC CMSE reed and DMSE electronic sensors. The rear adjuster acts purely as a travel stop, meaning live air pressure is required to maintain the end position.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-20S Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X80-20S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke80 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-20S

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×80Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-20S Is Used

tune

Product Changeover

Dial in the 60-80mm travel window on the fly to accommodate slightly different package lengths on a packaging line without changing hardware.

precision_manufacturing

End-Stop Calibration

Perfect for dialing in the exact retract position during machine setup, preventing overtravel damage to delicate tooling or workpieces.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-20S the Right Cylinder?

The adjustable 60-80mm stroke is ideal for machines that undergo frequent product changeovers, allowing operators to fine-tune the end position without swapping out the entire cylinder or adding external stopper blocks. For fixed-travel needs without the rear adjuster, the standard SAI series is the alternative.

Because the 80mm stroke is relatively short, external side-load guides are less critical here than on longer strokes. Remember that the rear adjuster is a stop, not a locking device; if you need to hold a load safely without live air pressure, you must use a SAIL pneumatic lock, a BSAI clamp-lock cylinder, or an external rod lock. This SAIJ model is dimensionally interchangeable per ISO 15552 standards and uses the Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounting set.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-20S FAQ

At 0.7 MPa, the push force increases to 1374N.

The rear adjuster screw allows you to shorten the 80mm nominal stroke by up to 20mm, creating a 60-80mm usable travel window. The adjuster acts only as a mechanical stop and does not lock the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-20S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X80-20S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.