
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X80-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 80mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X80-30-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 80 mm travel that can be dialed back by up to 30 mm, creating a 50-80 mm usable stroke window for precise end-position tuning.
This variant includes a magnet for position sensing and uses a carbon steel piston rod with an M16x1.5 thread. The extruded aluminum barrel incorporates sensor grooves on both sides, directly supporting AirTAC CMSE reed and DMSE electronic solid-state switches without extra brackets.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 50-80 mm end position during product size changes without replacing the cylinder or reworking external stops.
Set precise retract limits for testing or assembly stations, using the 30 mm adjustment range to accommodate multiple part lengths.
Fine-tune the final end position during initial machine commissioning to perfect timing and avoid mechanical hard hits.
The adjustable stroke is ideal for machine setups requiring variable end stops or product changeovers, allowing you to fine-tune the travel window without physically swapping the cylinder or adding external stops.
For an ISO 15552 replacement match, verify the 50 mm bore, 80 mm stroke, 30 mm adjustment, PT tapered port thread, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for fail-safe load holding, consider the SAIL or BSAI series.
Quick checklist
At 0.7 MPa, the push thrust increases to 1374 N.
The rear adjuster screw acts as a mechanical stop that trims the nominal 80 mm stroke back by up to 30 mm. This creates a usable travel window of 50-80 mm, allowing you to set the exact retract position without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.