
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X80-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 80mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X80-40 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the 80 mm nominal travel by up to 40 mm. This creates a highly versatile 40-80 mm usable travel window, perfect for dialing in exact end positions during machine commissioning.
Because the adjuster acts as a physical stop rather than a locking mechanism, the cylinder still requires live air to maintain its position under load. The extruded aluminum barrel includes sensor grooves on both sides, and the standard carbon steel rod handles robust daily operation. You can fine-tune the retract end without swapping out the entire unit or adding bulky external stops.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adapt the retract distance from 40 to 80 mm on packaging lines handling varying container sizes without changing the cylinder.
Fine-tune the exact end position during initial commissioning to achieve precise mechanical alignment without external shims.
Provide a customizable physical stop for diverting or gating items on a conveyor where the required stroke length is adjusted periodically.
The adjustable stroke is ideal for product changeovers on a line where the exact retract distance varies by up to 40 mm, saving the hassle of machining new hard stops. If your application requires the load to be held mechanically without continuous air pressure, you would need a separate locking cylinder like the SAIL or BSAI rather than relying on this adjuster.
When replacing an ISO 15552 cylinder, match the 50 mm bore, 80 mm stroke, PT tapered port thread, and carbon steel rod material. Mounting options for this SAIJ series include Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR styles found on some fixed-stroke variants.
Quick checklist
The rear adjuster acts as a physical stop that lets you shorten the 80 mm nominal stroke by up to 40 mm, providing a usable travel window of 40-80 mm. It is a travel stop, not a lock, so the cylinder still needs live air to hold the load.
At the maximum operating pressure of 1.0 MPa, the push force reaches 200 kgf.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.