
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X80-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 80mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X80-40-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. Because it carries the -S magnet, it directly supports AirTAC CMSE reed and DMSE solid-state sensors in the dual-side barrel grooves.
This specific SKU provides an 80mm nominal stroke that can be dialed back by up to 40mm, creating a highly flexible 40-80mm usable travel window. The rear adjuster acts purely as a mechanical stop to fine-tune the retract end position during commissioning without adding external stops. It utilizes a reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and PT tapered ports.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 40-80mm retract position during machine setup without physically replacing the cylinder or adding external stopper blocks.
Quickly adapt the travel window on packaging lines when handling different carton sizes, using the 40mm adjustment range to match new formats.
Leverage the built-in magnet with DMSE solid-state sensors to confirm the adjusted end position in automated assembly fixtures.
If you need less force, stepping down to a 40mm bore yields 628N; for heavier loads, an 80mm bore provides 2513N. The 40mm adjustment range on this 80mm stroke is ideal for product changeovers, letting you shift the end stop dynamically rather than swapping to a fixed-stroke SAI cylinder.
Remember that the rear adjuster is a travel stop, not a locking mechanism; it cannot hold a load without continuous live air. For load-holding without pressure, consider an SAIL or BSAI cylinder. Since the usable stroke can be shortened to 40mm, side loads are minimal, but always guide the load externally to prevent rod binding.
Quick checklist
It operates at speeds between 30 and 800 mm/s and uses G1/4 PT tapered ports.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective travel from 80mm down to 40mm. It sets the retract end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.