verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-50

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X80-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 80mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke80 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$88.16 $95.66Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-50

The AirTAC SAIJ50X80-50 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 80 mm stroke that can be mechanically dialed back by up to 50 mm, yielding a precise 30 to 80 mm usable travel window for exact end-position tuning at commissioning.

This extruded aluminum profile cylinder includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches, though a magnet is not included in this standard configuration. The carbon steel piston rod features an M16x1.5 thread, and the PT tapered port threads match the standard G1/4 port size. The rear adjuster acts strictly as a travel stop to set the retraction point and does not function as a load lock.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-50 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X80-50
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke80 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-50

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×80Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-50 Is Used

tune

Machine Changeover

Quickly dial in the 30-80 mm stroke window during product size changes without physically replacing the cylinder or repositioning hard stops.

precision_manufacturing

End-Position Calibration

Fine-tune the retract end-point during commissioning to achieve exact positioning accuracy for tooling and clamping fixtures.

factory

Variable End Stops

Provide adaptable retraction limits on assembly lines where multiple parts of varying heights are processed on the same station.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-50 the Right Cylinder?

If your setup requires less force, stepping down to a 40 mm bore yields 628 N at 0.5 MPa; stepping up to a 63 mm bore provides 1559 N. The adjustable stroke is ideal for fine-tuning the retraction point without swapping cylinders or adding external stops.

For a direct ISO 15552 replacement match, ensure you specify the 50 mm bore, 80 mm nominal stroke, 50 mm adjustment range, PT port threads, and the correct mounting accessory from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that the FB, CA, CB, and CR mounts are omitted from this series. Because the rear adjuster only sets the travel end, any requirement to hold a load without live air pressure necessitates a SAIL locking cylinder, a BSAI clamp-lock, or an external rod lock.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-50 FAQ

At 0.7 MPa, the push force increases to 1374 N.

The rear adjuster acts as a mechanical stop that trims the effective travel. For this SAIJ50X80-50 model, the 80 mm nominal stroke can be shortened by up to 50 mm, resulting in a usable travel window of 30 to 80 mm.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X80-50

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X80-50 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.