
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X800-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 800mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X800-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear mechanical stroke adjuster. The integrated rear stopper allows you to fine-tune the effective travel window down from 800 mm to a minimum of 790 mm.
This 10 mm adjustment range is ideal for precise end-position calibration during machine commissioning or product changeovers without adding external stops. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE solid-state switches, though this non-magnetic variant requires the -S option for position sensing. The adjuster acts strictly as a travel stop and does not hold the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X800-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 790-800 mm retraction point during machine setup to accommodate varying material thicknesses without physically swapping the cylinder.
Quickly modify the effective stroke by up to 10 mm on a packaging line when switching to a different carton size, saving hours of mechanical retooling.
If your force requirements are lower, stepping down to a 40 mm bore yields 628 N, while stepping up to a 63 mm bore provides 1559 N. Because the 800 mm stroke is substantial, the 20 mm rod and M16x1.5 thread need careful alignment; an external guide is strongly recommended to prevent excessive side-loading on the unsupported rod.
The SAIJ series uses a reduced mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR styles. For exact ISO 15552 dimensional interchangeability, confirm the 50 mm bore, 800 mm stroke, 10 mm adjustment, PT tapered port threads, and standard carbon steel rod material. Since the rear adjuster is a stopper rather than a locking mechanism, load-holding applications require a SAIL or BSAI variant instead.
Quick checklist
If operating at 0.7 MPa, the push force increases to 1374 N.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective travel from the nominal 800 mm down to 790 mm. It allows fine-tuning of the end position during commissioning but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.