
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X800-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 800mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X800-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that permits a usable travel window of 700-800mm. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE and DMSE switches.
This adjustable-stroke variant uses an external stopper at the rear to fine-tune the end position during commissioning without swapping the cylinder or adding external stops. The rear adjuster acts solely as a travel stop and works alongside the 30mm air cushions at both ends to decelerate the load; it does not hold the load without live air. For load-holding requirements without continuous pressure, consider the SAIL or BSAI series.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X800-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 700-800mm clamping distance during machine setup to accommodate different part lengths without changing fixtures.
Fine-tune the retract position on packaging conveyors to handle varying box sizes quickly during production transitions.
Safely adjust the stroke end-point during initial commissioning to prevent mechanical crashes, avoiding the need for external stop blocks.
The adjustable 700-800mm window is ideal for product changeovers or variable end-stops, providing setup flexibility that a fixed-stroke SAI cannot match. Because the nominal stroke is 800mm, an external guide is recommended to prevent excessive side-loading on the long unsupported rod.
To replace an ISO 15552 cylinder, match the 50mm bore, 800mm nominal stroke, 100mm adjustment, PT tapered port thread, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). This unit operates without a magnet, so position sensing requires an external mechanical switch or a different configuration.
Quick checklist
At 0.7MPa, the push force increases to 1374N.
The rear adjuster screw allows you to shorten the effective travel from the nominal 800mm down to 700mm. It acts as a mechanical stop to set the exact end position and is not a lock that holds the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.