
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X800-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 800mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X800-40 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 760 to 800 mm, allowing you to dial back the 800 mm nominal stroke by up to 40 mm during commissioning.
This extruded aluminum barrel includes sensor grooves on both sides for CMSE reed and DMSE electronic switches. The piston rod is carbon steel with an M16x1.5 thread, and the standard port is PT G1/4. The rear adjuster acts purely as a mechanical stop to set the end position; it does not lock the load, so an external guide is recommended for this 800 mm stroke to prevent side-loading damage.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X800-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 760 to 800 mm end position during product size transitions without replacing the cylinder or adding external mechanical stops.
Fine-tune the retract distance on a sorting pusher to accommodate different package lengths on the fly at commissioning.
An adjustable stroke is ideal for machine changeovers where you need a variable end-stop without physically swapping the cylinder or adding external stops.
Because the 800 mm stroke exceeds typical compact lengths, an external guide rail is strongly recommended to handle side loads. If your process requires the rod to hold its position without live air pressure, note that the rear adjuster and air cushions only decelerate travel; you would need an SAIL air-released lock, a BSAI clamp-lock, or an external pilot-operated check valve. For ISO 15552 dimensional interchangeability, match the 50 mm bore, 800 mm stroke, 40 mm adjustment, PT G1/4 port, and the SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 200 kgf.
The rear adjuster screw lets you mechanically shorten the effective travel from 800 mm down to 760 mm. It acts as a hard stop to fine-tune the end position without swapping cylinders, but it does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.