
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X800-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 800mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X800-50-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The integrated -S magnet allows precise position detection using AirTAC CMSE reed or DMSE electronic solid-state sensors housed within the dual-side extruded aluminum barrel grooves.
With a nominal 800mm stroke and a 50mm adjustment range, this model provides a usable travel window of 750-800mm. You can fine-tune the retract end-position at commissioning without adding external stops. The rear screw functions strictly as a travel stop and works alongside the standard 30mm air cushions to decelerate the load; it does not hold the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X800-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 750-800mm retract stop to instantly adjust diverter arm reach for different carton sizes on a packaging line without changing hardware.
Fine-tune the exact end-of-stroke position during setup using the rear adjuster, avoiding the need to physically swap out a fixed-stroke cylinder.
Utilize the 800mm travel for extending and retracting parts across a wide machine bed, relying on the adjustable stop to set the precise transfer point.
The adjustable stroke is selected over a fixed SAI cylinder when machine setups require variable end-stops or product-size changeovers, letting you dial in the exact 750-800mm travel window on the fly.
Because this cylinder features an 800mm stroke, the extended rod is susceptible to side-loading; an external guide should be used to prevent binding. To replace an ISO 15552 cylinder, match the 50mm bore, 800mm stroke, PT tapered port thread, and the -S magnet. Note that SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting FB, CA, CB, and CR. For load-holding without live pressure, use an external rod lock or select an AirTAC SAIL or BSAI model.
Quick checklist
At a maximum 1.0 MPa, it can deliver up to 200 kgf.
The rear adjuster screw allows you to shorten the effective stroke by up to 50mm, creating a usable travel window of 750-800mm. It acts as a physical stop to set the end position and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.