verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X800-75

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X800-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 800mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke800 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$169.32 $176.82Save 4% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X800-75

The AirTAC SAIJ50X800-75 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.

This model uses a 16mm carbon steel rod with an M12x1.25 thread, paired with adjustable air cushions at both ends to manage impact. The rear stopper functions solely as a travel stop and deceleration boundary, meaning it will not hold a load without live air pressure. For applications requiring position holding, consider the SAIL or BSAI series.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X800-75 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X800-75
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke800 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X800-75

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×800Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X800-75 Is Used

settings_input_component

Variable End-Stop Setup

Dial in the exact 725 to 800mm retraction point during machine commissioning to accommodate different material lengths without swapping hardware.

conveyor_belt

Product Changeover

Quickly adjust the stroke stopper on packaging lines when transitioning between varying box sizes or product formats.

precision_manufacturing

Long-Stroke Positioning

Leverage the 800mm travel for extended reach operations while fine-tuning the final end-position to meet tight dimensional tolerances.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X800-75 the Right Cylinder?

If your process requires less force, the 40mm bore offers 628N; if you need more power, stepping up to the 63mm bore yields 1559N. Because the 800mm stroke is quite long, an external guide rail is strongly recommended to prevent excessive rod side-loading and premature seal wear.

To match this ISO 15552 dimensionally interchangeable cylinder, specify a 50mm bore, 800mm stroke, 75mm adjustment range, PT tapered port thread, and standard carbon steel rod. Mounting options are limited to the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2. Without the -S magnet suffix, this unit does not support CMSE or DMSE sensors.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X800-75 FAQ

At the maximum 1.0 MPa pressure, it can deliver up to 200 kgf.

The rear adjuster screw acts as a mechanical stop that allows you to shorten the effective travel from the 800mm nominal stroke down to 725mm. It only sets the end position and does not lock or hold the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X800-75

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X800-75 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.