
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X85-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 85mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X85-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides an 85 mm nominal stroke that can be dialed back by up to 20 mm, creating a precise 65-85 mm usable travel window for commissioning without external stops.
This extruded aluminum profile barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches. The carbon steel rod uses an M16x1.5 thread, and the cylinder uses a PT tapered G1/4 port. The rear adjuster acts strictly as a travel stop for end-position tuning, not a lock, meaning live air pressure is required to hold the load.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X85-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 65-85 mm retract end-stop during initial commissioning to perfect a pressing operation without machining external spacers.
Quickly adjust the travel window on a packaging line when switching to a slightly different carton size, saving downtime.
Use the rear screw to set a precise depth limit for a machining fixture, ensuring consistent positioning across part batches.
The adjustable stroke is selected over a fixed SAI cylinder when you need to fine-tune the retract end-position during machine setup or product changeover. To match this ISO 15552 replacement exactly, specify the 50 mm bore, 85 mm stroke, 20 mm adjustment, PT port thread, and standard carbon steel rod without a magnet.
Because the stroke is under 300 mm, side-load stress is minimal, though the M16x1.5 rod thread handles moderate side loads well. If your process requires holding the load without live air pressure, the rear adjuster cannot act as a brake; you would need to look at the SAIL air-released lock or BSAI clamp-lock series instead.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 200 kgf.
The rear adjuster screw allows you to shorten the 85 mm nominal stroke by up to 20 mm, providing a usable travel window of 65 to 85 mm. This stopper only sets the end position and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.