
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X85-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 85mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X85-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 85 mm stroke that can be dialed back by up to 20 mm, creating a precise 65-85 mm usable travel window for exact end-position tuning during commissioning.
This unit includes a standard carbon steel rod and a -S magnet for position sensing, which supports AirTAC CMSE reed and DMSE electronic solid-state switches housed within the dual-sided sensor grooves of the extruded aluminum barrel. The rear adjuster acts purely as a mechanical stop to set the travel end and does not hold the load without live air pressure. For load-holding requirements without continuous pressure, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X85-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 65 to 85 mm retract distance during machine commissioning to accommodate varying product lengths without changing hardware.
Quickly fine-tune the stroke end-position on automated lines when switching between different material sizes, ensuring precise stops every time.
Leverage the built-in magnet and dual sensor grooves to mount DMSE electronic switches for repeatable feedback across the adjusted travel window.
Choose this 50 mm bore adjustable cylinder when your assembly requires on-the-fly end-stop tuning without swapping out physical components. The SAIJ50X85-20-S is configured with PT tapered port threads (G1/4) and utilizes the standard SAIJ mounting subset, which includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting the FB, CA, CB, and CR mounts. Because the 85 mm stroke is relatively short, side-load risks are minimal, though external guides are always recommended for offset loads. To replace an existing ISO 15552 cylinder, match the 50 mm bore, 85 mm stroke, 20 mm adjustment range, PT port, and -S magnet requirement.
Quick checklist
The rear mechanical stopper allows you to shorten the 85 mm nominal stroke by up to 20 mm, providing a usable travel window of 65 to 85 mm. This enables fine-tuning of the end position at commissioning without adding external stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.