
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X85-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 85mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X85-30 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 85 mm stroke that can be fine-tuned down by up to 30 mm, giving you a usable travel window of 55 to 85 mm. This allows precise end-position calibration during commissioning without needing external stops.
The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement. This version uses a standard carbon steel piston rod with PT tapered ports. It supports a speed range of 30-800 mm/s and uses the SAIJ mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR brackets.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X85-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial in the 55-85 mm stroke window when switching between product sizes on a packaging line, avoiding physical cylinder swaps.
Fine-tune the final retract position during machine commissioning to prevent mechanical interference without adding external stopper blocks.
If your setup needs less force, stepping down to a 40 mm bore yields 628 N; if more thrust is required, a 63 mm bore provides 1559 N. The adjustable rear screw is a travel stop, not a lock, so it cannot hold a load without live air. For dead-end holding, consider an external pilot-operated check valve or the SAIL lock variant.
Because the stroke is under 300 mm, side-load risks are moderate, but the 20 mm rod and M16x1.5 thread still require proper alignment to prevent premature seal wear. When replacing an ISO 15552 cylinder, match the 50 mm bore, 85 mm stroke, PT port thread, and your chosen mounting bracket.
Quick checklist
The rear adjuster acts as a mechanical stop that trims the effective travel. For this model, the 85 mm nominal stroke can be reduced by up to 30 mm, resulting in a usable travel window of 55 to 85 mm. It is a stop, not a lock, and requires live air to maintain position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.