The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X85-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 85mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X85-40-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that trims the effective travel down to a 45-85 mm window from its 85 mm nominal length. The extruded aluminum barrel includes sensor grooves on both sides, and because this unit includes a magnet (-S), it supports position detection via CMSE reed or DMSE electronic solid-state switches.
Equipped with variable air cushions at both ends, this model decelerates the piston smoothly without needing external shock absorbers. The rear adjuster screw acts purely as a mechanical stop for fine-tuning end positions during commissioning; it is not a lock and will not hold a load without live air pressure. For load-holding requirements without continuous air, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X85-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 45-85 mm travel window on the fly to accommodate varying package sizes or product lengths on a packaging line without swapping hardware.
Fine-tune the exact end-of-stroke position during machine commissioning to perfect timing and avoid mechanical hard crashes into fixtures.
The 40 mm adjustment range is highly valuable for machine setups requiring frequent product-size changeovers, allowing operators to dial in the exact end-stop without swapping the cylinder or adding external stops. Unlike a fixed-stroke SAI cylinder, this adjustable version provides a built-in tuning window for varying part dimensions.
As a dimensionally interchangeable ISO 15552 profile cylinder, it replaces units with a 50 mm bore, 85 mm stroke, PT tapered port threads, and a magnet. It uses a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). If your stroke exceeds 300 mm, an external guide is recommended to prevent rod binding, though this 85 mm travel is well within safe side-load limits for the 20 mm rod.
Quick checklist
At the maximum pressure of 1.0 MPa, it delivers up to 200 kgf of thrust.
The rear adjuster screw acts as a mechanical stop that lets you shorten the 85 mm nominal stroke by up to 40 mm, creating a usable travel window of 45 to 85 mm. This allows precise end-position tuning without changing the cylinder, though it only stops the piston and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.