The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X85-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 85mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X85-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 50 mm. This creates a usable stroke window of 35 to 85 mm, letting you fine-tune the retract end-position at commissioning without swapping the cylinder or bolting on external stops. It delivers a robust 982 N pull force at 0.5 MPa, making it well-suited for moderate-load positioning tasks.
Built with an extruded aluminum barrel housing dual sensor grooves, this unit uses a 20 mm carbon steel rod with an M16x1.5 thread to handle side loads effectively. It features PT (tapered) G1/4 ports and variable air cushions at both ends to decelerate the moving load. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air pressure; for dead-stop holding, consider an external rod lock or the SAIL series.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X85-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position during product size changes without replacing the entire cylinder assembly.
Fine-tune the end-of-stroke stop during initial setup to compensate for mechanical tolerances in the fixture.
Adjust the travel window from 35 to 85 mm on the fly for processes requiring flexible material engagement distances.
Choose this 50 mm bore when your application requires more force than a 40 mm bore provides (628 N pull at 0.5 MPa) but does not need the heavier 63 mm class (1402 N pull). The 50 mm adjustability range is ideal for machine setups requiring variable end-stops or frequent product-size changeovers on a line. Because the stroke is relatively short at 85 mm, external side-load guides are less critical here than on longer strokes, though the 20 mm rod still provides excellent rigidity. For an ISO 15552 replacement, match the 50 mm bore, 85 mm stroke, 50 mm adjustment, PT G1/4 ports, and standard carbon steel rod without a magnet.
Quick checklist
The rear adjuster acts as an external stopper that lets you shorten the nominal 85 mm stroke by up to 50 mm, providing an adjustable travel window of 35 to 85 mm. It only sets the travel end and does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.