verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X85-75S

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X85-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 85mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke85 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$91.88 $99.38Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X85-75S

The AirTAC SAIJ50X85-75-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. The built-in -S magnet supports position sensing via AirTAC CMSE reed and DMSE electronic switches installed in the dual-side sensor grooves. Equipped with PT tapered port threads, it operates smoothly between 30 and 800 mm/s.

This specific SKU provides an exceptionally wide usable travel window of 10 to 85 mm, allowing you to dial back the nominal 85 mm stroke by up to 75 mm. The rear adjuster acts purely as a mechanical stop to fine-tune the end position during commissioning without swapping cylinders. It is not a locking device, so for load-holding without live air pressure, you should consider the SAIL or BSAI series instead.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X85-75S Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X85-75S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke85 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X85-75S

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×85Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X85-75S Is Used

tune

Variable End-Stop Positioning

Ideal for packaging lines where the end-position needs frequent fine-tuning across a 10 to 85 mm travel window without changing the physical cylinder setup.

settings_input_component

Product Size Changeover

Quickly adapt to different product lengths on a conveyor by dialing back the stroke up to 75 mm, minimizing machine downtime during format transitions.

factory

Machine Commissioning

Perfect for dialing in exact end-of-stroke limits during initial machine setup, replacing the need to physically swap out fixed-stroke SAI cylinders.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X85-75S the Right Cylinder?

The massive 75 mm adjustment range is ideal for machines processing varying product sizes, as it lets operators set new end-stops on the fly without adding external stops. Since the stroke is under 300 mm, side-load stress on the 20 mm rod is manageable, though long unsupported loads still need an external guide.

When replacing an ISO 15552 cylinder, match the 50 mm bore, 85 mm stroke, 75 mm adjustment, PT port threads, and the -S magnet requirement. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, deliberately omitting FB, CA, CB, and CR brackets. The standard carbon steel rod and TPU seals handle standard ambient temperatures perfectly.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X85-75S FAQ

At 0.7 MPa, the push force increases to 1374 N.

The rear adjuster screw lets you shorten the effective stroke from the nominal 85 mm down to as little as 10 mm, giving a 10-85 mm usable travel window. It functions as a travel stop and does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X85-75S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X85-75S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.