verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X850-50

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X850-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 850mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke850 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$181.88 $189.38Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X850-50

The AirTAC SAIJ50X850-50 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.

Equipped with a 20mm carbon steel rod and an M16x1.5 thread, this unit handles standard operational side loads effectively. It uses a PT tapered G1/4 port and features variable air cushions at both ends to manage impact deceleration across its 30-800mm/s speed range.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X850-50 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X850-50
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke850 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X850-50

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×850Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X850-50 Is Used

settings_input_component

Machine Changeovers

Dial in the exact end-stop distance from 800 to 850mm during product size transitions without changing the cylinder mounting.

precision_manufacturing

Assembly Calibration

Fine-tune the extended position on automated assembly lines to compensate for mechanical wear or tooling variations.

factory

Conveyor Positioning

Set precise retract stops for diverter mechanisms on packaging conveyors where exact stroke endpoints are critical.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X850-50 the Right Cylinder?

Choose this 50mm bore adjustable-stroke cylinder when you need precise end-position tuning without swapping out components or adding external stops. For higher force demands, a 63mm bore provides 1559N.

Because the nominal stroke is 850mm, an external guide is recommended to prevent rod deflection and premature seal wear under heavy loads. Remember that the rear adjuster functions strictly as a travel stop, not a lock; this SAIJ cylinder will not hold a load without continuous air pressure. For load-holding requirements, consider the SAIL or BSAI series. To match this ISO 15552 footprint exactly, specify the 50mm bore, 850mm stroke, 50mm adjustment, PT port, and no magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X850-50 FAQ

At the maximum 1.0 MPa pressure, it can deliver up to 200 kgf.

The rear adjuster screw acts as a mechanical stop, allowing you to trim the effective travel back from the 850mm nominal stroke down to 800mm. This provides a 50mm tuning window for setting exact end positions without replacing the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X850-50

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X850-50 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.