The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X90-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 90mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X90-10 is a double-acting, double-rod ISO 15552 profile cylinder with a 50 mm bore and a 90 mm stroke. It features a rear adjusting screw that lets you trim the effective travel back by up to 10 mm, creating an 80-90 mm usable stroke window. This fine-tuning capability is ideal for setting exact retract positions during commissioning without adding external stops. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
It uses a G1/4 port and a 16 mm carbon steel rod with an M16x1.5 thread. The variable air cushions at both ends absorb impact, but remember the rear adjuster acts only as a travel stop—it does not hold the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X90-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 80-90 mm travel window during product size changes to set new retract positions rapidly without mechanical modifications.
Use the 10 mm rear adjuster to fine-tune the final retract position during commissioning, avoiding the need for external spacers.
Adjust the stroke end-point on the fly to accommodate different package lengths on a pneumatic routing gate.
If your setup demands less force, stepping down to a 40 mm bore yields 628 N; for heavier loads, a 63 mm bore provides 1559 N. The SAIJ50X90-10 is selected over a fixed-stroke SAI when a machine requires product changeovers or variable end-stops without swapping the entire cylinder.
This model uses a PT tapered port thread and standard carbon steel rod. Because it lacks a magnet (-S), it does not support AirTAC CMSE or DMSE sensors directly. For any load-holding requirements during air loss, note that the rear adjuster is not a lock—consider an AirTAC SAIL or BSAI series cylinder instead.
Quick checklist
At the maximum pressure of 1.0 MPa, it can deliver up to 200 kgf.
The rear adjuster screw allows you to shorten the 90 mm nominal stroke by up to 10 mm, providing an adjustable 80-90 mm travel window. The adjuster acts as a mechanical stop for end-position tuning and does not function as a lock to hold the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.