The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X90-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 90mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X90-30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 90mm nominal stroke that can be dialed back by up to 30mm, creating a precise 60-90mm usable travel window for fine-tuning end positions at commissioning.
This extruded aluminum barrel design includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches. The carbon steel rod with an M16x1.5 thread handles standard side loads well, and the unit uses PT tapered G1/4 ports. The rear adjuster acts purely as a mechanical stop to set the travel end and relies on the built-in air cushions for deceleration; it is not a locking mechanism.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X90-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 60-90mm travel window during product size changeovers on a packaging line without adding external stopper blocks.
Fine-tune the retract stroke end during machine commissioning to perfectly seat parts, absorbing mechanical tolerance variations.
Adjust the diverting arm reach on the fly to handle different package widths on a conveyor system without changing cylinders.
Choose this 50mm bore adjustable-stroke cylinder when your setup requires variable end-stops or frequent product changeovers without swapping out the entire physical cylinder body. Conversely, moving up to a 63mm bore provides 1559N.
Because the SAIJ50X90-30 uses a PT port thread type and lacks a magnet, it is built for basic pneumatic positioning rather than electronic feedback. Remember that a plain SAIJ cylinder does not hold its load without live air pressure—the rear adjuster is a travel stop, not a lock. For true fail-safe load holding, consider the AirTAC SAIL or BSAI series. This model supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options.
Quick checklist
At the maximum 1.0MPa pressure, it delivers up to 200kgf.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke by up to 30mm, providing a usable travel window of 60-90mm. It sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.