The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X90-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 90mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X90-40 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 90 mm stroke by up to 40 mm. This yields a usable travel window of 50-90 mm, letting you fine-tune the retract end-position at commissioning without adding external stops or swapping the barrel.
This model features a 20 mm carbon steel piston rod with an M16x1.5 thread, providing a robust interface for moderate side loads, though long unsupported strokes still require an external guide. The extruded aluminum barrel includes sensor grooves on both sides, and because this SKU omits the -S magnet option, it is not equipped for position feedback. The mounting set is reduced compared to fixed-stroke variants, supporting Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets while omitting FB, CA, CB, and CR.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X90-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance from 50 to 90 mm during product size transitions on a conveyor line without physically swapping the cylinder.
Fine-tune the final resting position of tooling at commissioning to compensate for mechanical tolerance stack-up without adding external stopper blocks.
Vary the engagement depth of a pressing or seating operation on the fly, using the rear screw to set the precise 50-90 mm travel limit for delicate assemblies.
The adjustable 50-90 mm travel window is ideal for product changeovers on a packaging line where exact end-stops vary by part size. The rear adjuster acts purely as a mechanical stop and works with the standard variable air cushion to decelerate the load; it does not hold the load without live air pressure. For fail-safe load holding, select the SAIL (air-released lock) or BSAI (clamp-lock) series instead. To replace an ISO 15552 cylinder, match the 50 mm bore, 90 mm stroke, 40 mm adjustment, PT tapered port, and the chosen mounting bracket.
Quick checklist
If you increase the supply pressure to 0.7 MPa, the push force rises to 1374 N.
The rear adjuster screw acts as a mechanical stop that shortens the 90 mm nominal stroke by up to 40 mm. This creates a usable travel window of 50-90 mm, allowing you to set the exact retract position during setup without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.