verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X90-40S

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X90-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 90mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke90 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$91.88 $99.38Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X90-40S

The AirTAC SAIJ50X90-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The integrated -S magnet enables position sensing across both sensor grooves, working seamlessly with AirTAC CMSE reed and DMSE electronic solid-state switches.

This specific SKU features a 90mm nominal stroke that can be dialed back by up to 40mm, creating a highly versatile 50-90mm usable travel window. Instead of swapping out physical components during a product changeover, operators can turn the external rear adjusting screw to fine-tune the retract end position. The adjuster acts purely as a mechanical travel stop to set deceleration limits and does not function as a locking mechanism to hold the load without live air pressure.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X90-40S Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X90-40S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke90 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X90-40S

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×90Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X90-40S Is Used

tune

Product Changeovers

Quickly dial the rear screw to shift the 50-90mm travel window, adapting packaging lines to new carton sizes without swapping cylinders.

settings_input_component

End-Position Tuning

Fine-tune the retract end-stop during machine commissioning to perfect seating positions without adding external mechanical stops.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X90-40S the Right Cylinder?

If your setup demands higher force, stepping up to the 63mm bore yields 1559N at the same pressure, while dropping down to the 40mm bore provides 628N. The 40mm adjustment range on this model is exceptionally wide, making it ideal for machines that run multiple product sizes and need rapid end-stop tuning without adding external stops.

As a dimensionally interchangeable ISO 15552 cylinder, this model replaces standard units using identical bore, stroke, and 50-90mm adjustment specifications. It features a PT tapered port thread, a 16mm carbon steel rod with an M12x1.25 thread, and supports a mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2. For applications requiring true load-holding without live air, consider the AirTAC SAIL or BSAI clamping series instead of relying on the SAIJ adjuster.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X90-40S FAQ

At the maximum operating pressure of 1.0 MPa, it yields 200 kgf.

The rear adjuster screw allows you to shorten the 90mm nominal stroke by up to 40mm, providing a usable travel window of 50-90mm. This screw functions only as a travel stop and does not lock or hold the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X90-40S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X90-40S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.