
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X95-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 95mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X95-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the nominal 95mm travel back by up to 30mm. This creates a usable 65-95mm end-position window for precise mechanical tuning during commissioning.
The 16mm carbon steel rod and M16x1.5 thread provide robust resistance to side loads, though any stroke over 300mm would still require an external guide. It uses a PT tapered port and features variable air cushions at both ends to manage deceleration. The extruded aluminum barrel includes sensor grooves on both sides for adding CMSE or DMSE switches if needed.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X95-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 65 to 95mm end-of-stroke position during commissioning without adding external stops or machining spacers.
Quickly adjust the travel window on packaging lines when handling different product sizes, reducing changeover downtime.
Use the rear screw to fine-tune the final retract position on light assembly fixtures, ensuring precise mechanical placement.
Choose this 50mm bore adjustable-stroke cylinder when an application requires fine end-position tuning or variable product changeovers without swapping the physical cylinder.
Because the rear adjuster acts only as a travel stop and the air cushions manage deceleration, neither will hold a load statically without live air pressure. For true fail-safe load holding, consider an external rod lock, a pilot-operated check valve, or the AirTAC SAIL or BSAI series. This SAIJ model is dimensionally interchangeable per ISO 15552 and uses the reduced mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
The rear adjuster screw lets you shorten the 95mm nominal stroke by up to 30mm, providing a usable travel window of 65 to 95mm. This allows you to set the exact retract end-position mechanically during setup without replacing the cylinder.
At a maximum 1.0 MPa operating pressure, it can deliver up to 200 kgf of push force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.