
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X95-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 95mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
Because the nominal 95mm stroke can be dialed back by up to 50mm, this model yields a highly flexible 45-95mm usable travel window. The extruded aluminum barrel features sensor grooves on both sides, ready to accept CMSE reed or DMSE electronic switches if a magnet is added later.
Instead of fabricating custom external stops, you can fine-tune the retract position directly during commissioning. The adjuster functions strictly as a mechanical travel stop to set deceleration endpoints, meaning it will not hold a load without live air pressure. For load-holding requirements, consider the SAIL or BSAI variants.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X95-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 45-95mm travel window during product size transitions without swapping out the entire cylinder or adding external shims.
Use the rear stopper to precisely set the retract endpoint during commissioning, absorbing mechanical tolerances in the fixture.
Ideal for assemblies requiring multiple stroke lengths from a single cylinder, allowing rapid adjustment for different part heights.
Choose this 50mm bore when a 40mm bore (528N pull at 0.5 MPa) is too weak, but a 63mm bore (1402N pull) is unnecessarily large. The 50mm bore uses a G1/4 PT port and a 16mm rod with an M16x1.5 thread, providing robust side-load resistance for this short-stroke application.
An adjustable stroke is selected over a fixed SAI cylinder when a machine requires variable end-stops for quick product changeovers. If your setup needs true position holding without continuous air, this cylinder's adjuster is not a lock; you would need to specify a SAIL pneumatic lock or an external pilot-operated check valve. This model is dimensionally interchangeable per ISO 15552, using the standard SAIJ mounting subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
The operating speed range is 30-800 mm/s, supported by adjustable air cushions at both ends.
The rear adjuster acts as a mechanical stop that shortens the 95mm stroke by up to 50mm, creating a 45-95mm usable travel window. It only sets the end position and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.