
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X95-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 95mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X95-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This extreme adjustability eliminates the need to swap cylinders for product size changeovers.
Fitted with a -S magnet, it supports CMSE reed and DMSE electronic sensors housed within the dual-side sensor grooves on the extruded aluminum barrel. The carbon steel rod and M16x1.5 thread provide robust load coupling, while the PT tapered port threads ensure a secure pneumatic seal at the G1/4 ports.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X95-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Rapidly reconfigure retraction distances on packaging lines handling varying container sizes by dialing in the 20-95mm travel window instead of physically swapping hardware.
Fine-tune the exact endpoint during machine commissioning to prevent over-travel and crush damage, using the rear stopper to set precise mechanical limits.
Choose this 50mm bore when an application demands a wide variance in end-positioning without mechanical rebuilds, stepping down from a 63mm bore (1559N at 0.5 MPa) if that excess force is unnecessary, or up from a 40mm bore (628N) if more thrust is required. The rear adjuster acts purely as a travel stop for fine-tuning the retraction point, not as a lock; it cannot hold a load without continuous live air. For load-holding requirements without air pressure, consider an external rod lock or the AirTAC SAIL series.
To match this exact ISO 15552 interchangeable replacement, specify: 50mm bore, 95mm stroke, 75mm adjustment range, PT port threads, carbon steel rod, and the -S magnet option. Mounting choices are limited to the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
The rear adjuster screw allows you to shorten the effective stroke from its 95mm nominal length by up to 75mm, creating a usable travel window of 20-95mm. It functions as a mechanical stop and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.