verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X950-100

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X950-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 950mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke950 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$194.45 $201.95Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X950-100

The AirTAC SAIJ50X950-100 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 950 mm travel by up to 100 mm. This creates a precise 850-950 mm usable window for fine-tuning the retract end-position during commissioning without adding external stops.

Featuring a 20 mm carbon steel piston rod and an M16x1.5 thread, this unit handles standard operational stresses effectively. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches if you add a magnet later. It uses a PT tapered port and relies on adjustable air cushions at both ends to decelerate the load smoothly.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X950-100 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X950-100
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke950 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X950-100

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×950Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X950-100 Is Used

tune

Product Changeover

Dial in the 850-950 mm retract position during packaging format changes without physically swapping the cylinder or adding external mechanical stops.

precision_manufacturing

Machine Setup

Fine-tune the end-of-stroke location during initial commissioning to perfectly align tooling, using the rear screw to absorb minor dimensional variances.

conveyor_belt

Variable End-Stop

Adjust the travel limit on a long-stroke conveyor sorting arm to handle different package sizes on the fly.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X950-100 the Right Cylinder?

Because the stroke is 950 mm, an external guide is highly recommended to prevent excessive side-loading on the rod. The rear adjuster acts strictly as a travel stop, not a lock; the cylinder will not hold its load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead. To match an ISO 15552 replacement, verify the 50 mm bore, 950 mm stroke, 100 mm adjustment, PT port, and standard carbon steel rod.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X950-100 FAQ

The rear adjuster acts as a mechanical stop that lets you shorten the effective stroke from the 950 mm nominal length by up to 100 mm, providing a usable travel window of 850 to 950 mm. It only sets the end position and does not lock the load without air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X950-100

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X950-100 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.