
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X950-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 950mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X950-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that permits a usable travel window of 930 to 950 mm. This extruded aluminum barrel design includes sensor grooves on both sides for flexible switch placement.
Because the nominal 950 mm stroke approaches the limits for this bore size, the integrated adjuster allows you to fine-tune the exact end position at commissioning without adding external stops. The rear screw functions strictly as a travel stop to set deceleration, not as a lock, meaning it will not hold the load without live air pressure. For position holding without continuous pressure, consider the related SAIL or BSAI series.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X950-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 930-950 mm travel window during product size transitions on a packaging line without physically swapping the cylinder or repositioning hard stops.
Drive a carriage over a 950 mm span and use the rear adjuster to perfectly time the retraction end-point against a varying mechanical load.
Trim the effective stroke by up to 20 mm during initial machine setup to synchronize multiple actuators without disassembling the mounting hardware.
Choose this 50 mm bore adjustable-stroke cylinder when your assembly requires exact end-position tuning during product changeovers, rather than relying on a fixed-stroke SAI model. To ensure a true ISO 15552 replacement match, verify the 950 mm stroke, the 20 mm adjustment range, the PT G1/4 port, and the standard carbon steel rod.
At a 950 mm stroke, the long unsupported piston rod is highly susceptible to side-loading and deflection, so an external guide rail must be incorporated to prevent premature seal wear. The available mounting set for this series includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting the FB, CA, CB, and CR options.
Quick checklist
The rear adjuster acts as an external stopper that lets you shorten the effective travel from the 950 mm nominal stroke down to 930 mm. It sets the end position and works with the variable air cushions to control deceleration, but it does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.