The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X950-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 950mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X950-30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. The integrated 30mm adjustment mechanism creates a usable travel window between 920 and 950mm, allowing you to dial in the exact retract end-position during commissioning without swapping out the entire actuator.
This extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches, though this specific SKU is configured without a magnet. The standard carbon steel rod features an M16x1.5 thread, and the unit relies on variable air cushions at both ends to decelerate the load. The rear adjuster functions strictly as a travel stop, not a locking device, so it cannot hold a load without continuous live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X950-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 920-950mm retract distance on the fly when switching between product sizes on a packaging line, avoiding the need to physically swap cylinders.
Use the 30mm rear stopper to perfectly align end-of-stroke positions during initial commissioning without adding bulky external mechanical stops.
Ideal for automated assembly equipment where the final retract position needs occasional micro-adjustments to accommodate tooling wear or sensor calibration.
Choose this 50mm bore when you need more thrust than the 40mm option (628N at 0.5MPa) but want a more compact footprint than the 63mm class (1559N at 0.5MPa). The adjustable 920-950mm window is ideal for product changeovers or fine-tuning machine setup, whereas a fixed SAI cylinder locks you into a single 950mm dimension. For an exact ISO 15552 replacement, match the 50mm bore, 950mm stroke, PT port thread, and your preferred mounting accessory from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Because this unit features a long 950mm stroke, the 16mm rod will experience amplified side-loading if the load is not properly supported. An external guide mechanism is highly recommended to prevent premature seal wear. If your application requires true load-holding without live air, this cylinder is not suitable; consider the SAIL (air-released lock) or BSAI (clamp-lock) variants instead.
Quick checklist
At 0.7MPa, the push force increases to 1374N.
The rear adjuster acts as a mechanical stop that trims the effective stroke. For this SAIJ50X950-30 model, you can shorten the nominal 950mm stroke by up to 30mm, resulting in a usable travel window of 920-950mm. It is a travel stop, not a lock, and requires live air to hold position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.