
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X950-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 950mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X950-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. Because this SKU carries the -S magnet option, it directly supports AirTAC CMSE reed and DMSE solid-state electronic sensors fitted into the dual-side sensor grooves on the extruded aluminum barrel.
With a 950mm nominal stroke and a 40mm adjustment range, this model provides a usable travel window of 910 to 950mm. You can fine-tune the retract end position at commissioning or during product changeover without swapping the cylinder or adding external stops. The rear adjuster acts purely as a mechanical stop for deceleration alongside the variable air cushions; it does not lock the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X950-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 910-950mm window during line changeovers without machining new hard stops.
Adjust the stroke end-point on the fly to handle different package lengths on a single sorting diverter.
Fine-tune the end-of-travel stop on a 950mm stroke axis to perfect material indexing without external stopper blocks.
If your application requires less force, the 40mm bore offers 628N; if you need more clamping power, step up to the 63mm bore for 1559N. The adjustable stroke is ideal for variable end-stops, but if you need true load-holding without continuous air pressure, select an SAIL (pneumatic lock) or BSAI (clamp-lock) cylinder instead.
For an exact ISO 15552 replacement match, verify a 50mm bore, 950mm stroke, 40mm adjustment, PT tapered port threads, and the -S magnet. Because the stroke is 950mm, the 16mm rod is highly susceptible to side-loading and sagging; you must use an external guide rail to prevent premature seal wear. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting the FB, CA, CB, and CR brackets.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 200 kgf.
The rear adjuster screw allows you to shorten the effective travel from 950mm down to 910mm. It acts as a mechanical stop to fine-tune the end position at commissioning, but it is not a lock and will not hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.