
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X950-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 950mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X950-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel within a 900-950 mm window. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting.
This model uses a PT tapered port thread and a 16 mm carbon steel rod with an M12x1.25 thread. The rear adjuster acts as a mechanical stop to dial in the exact end position during commissioning without adding external stops. It features variable air cushions at both ends to absorb kinetic energy, though it does not hold the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X950-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 900-950 mm end-stop when switching a conveyor line to handle different product lengths without swapping the cylinder.
Fine-tune the retract position during initial commissioning to align tooling precisely, eliminating the need for external shims.
Adjust the travel window on automated assembly equipment to accommodate varied component sizes quickly and accurately.
Choose this 50 mm bore adjustable-stroke cylinder when your application requires precise end-position tuning during machine setup or product changeover, rather than relying on a fixed-stroke SAI model. Because the 950 mm stroke is quite long, an external guide is highly recommended to prevent excessive side loading on the rod.
This cylinder is dimensionally interchangeable per ISO 15552. To match this exact configuration, specify a 50 mm bore, 950 mm nominal stroke, 50 mm adjustment range, PT port thread, and standard carbon steel rod without a magnet. For load-holding requirements without continuous air pressure, consider the SAIL or BSAI series, as the SAIJ adjuster is strictly a travel stop and not a locking mechanism.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it delivers up to 200 kgf.
The rear adjuster acts as a mechanical stop that lets you trim the effective travel back by up to 50 mm, creating a usable 900-950 mm stroke window. It sets the end position but does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.