
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X950-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 950mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X950-75 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in adjustability allows operators to dial in the retract end position during commissioning without adding external stopper blocks.
This model features a carbon steel piston rod and PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement. While the rear adjuster screw sets the travel limit and the variable air cushions decelerate the load, neither component acts as a lock; the cylinder requires live air to maintain its position.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X950-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for assembly lines processing different width materials, allowing operators to dial back the retract position by up to 75mm to accommodate changing part dimensions without swapping cylinders.
Provides precise 875-950mm travel for automated material pushers or large-format packaging equipment where exact end-of-stroke positioning is critical for cycle timing.
Speeds up equipment format changeovers by letting technicians mechanically fine-tune the stroke limit on the rear adjuster rather than reprogramming the entire pneumatic motion controller.
If you need less force, the 40mm bore provides 628N; if your load is heavier, stepping up to the 63mm bore yields 1559N. Because this SKU has a 950mm stroke, the M16x1.5 rod is subject to significant side loads if the load is unsupported, making an external guide rail essential for long-term seal integrity.
An adjustable-stroke SAIJ is preferred over a fixed SAI cylinder when machinery processes multiple part sizes and requires rapid end-position tuning at setup. For a true ISO 15552 replacement match, confirm the 50mm bore, 950mm stroke, 75mm adjustment range, PT port thread, and required mounting hardware. The available mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 200 kgf.
The rear adjuster screw acts as a mechanical stop that lets you shorten the 950mm nominal stroke by up to 75mm, providing an effective travel window of 875-950mm. It is a travel stop, not a lock, so the cylinder still requires continuous air pressure to hold the load in place.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.