Airtac SAIJ80 Adjustable Cylinder SAIJ80AX15-10
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80AX15-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 15mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke15 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX15-10
The AirTAC SAIJ80X15-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic sensors.
This model is built with an SUS420J2 stainless steel rod (code A) for enhanced corrosion resistance and uses PT tapered port threads. The rear adjuster acts purely as a mechanical stop to fine-tune the end position without swapping components, but it does not hold the load without live air pressure. For true load-holding requirements, consider the SAIL or BSAI series instead.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX15-10 Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80AX15-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80AX15-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX15-10 Is Used
Short-Stroke Clamping
Ideal for clamping parts with varying thicknesses, using the 10mm adjustment to perfectly tune the final contact position without repositioning the cylinder body.
Machine Changeover
Speeds up product line changeovers by allowing operators to dial in the exact 5-15mm travel window required for new component sizes via the rear stopper screw.
End-Stop Tuning
Provides precise mechanical end-position tuning during machine commissioning, eliminating the need to add external physical stops or shims to the fixture.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX15-10 the Right Cylinder?
Choose this 80mm bore if you need higher force than the 50mm bore (982N at 0.5MPa) but in an extremely short stroke envelope. The adjustable stroke is ideal for product changeovers where the exact end-of-travel contact point varies slightly, avoiding the need to physically swap cylinders. The 25mm piston rod and M20x1.5 thread provide robust side-load capacity, though external guidance is still recommended for any lateral forces.
When replacing an ISO 15552 cylinder, match the 80mm bore, 15mm nominal stroke, 10mm adjustment range, PT G3/8 port, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that FB, CA, CB, and CR mounts are omitted from this adjustable variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX15-10 FAQ
At the maximum 1.0 MPa pressure, it can deliver up to 513 kgf.
The rear adjuster screw lets you shorten the nominal 15mm stroke by up to 10mm, creating a usable travel window of 5-15mm. This stopper only sets the end position and deceleration; it does not lock or hold the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80AX15-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.