Airtac SAIJ80 Adjustable Cylinder SAIJ80AX150-50
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80AX150-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 150mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke150 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX150-50
The AirTAC SAIJ80X150-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that trims the effective travel back by up to 50 mm. This yields a usable stroke window of 100 to 150 mm, allowing precise end-position tuning at commissioning without swapping hardware.
The 25 mm carbon steel rod normally pairs with an M20x1.5 thread, but this specific configuration uses a SUS420J2 stainless steel rod (option A) for improved corrosion resistance. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX150-50 Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80AX150-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80AX150-50
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX150-50 Is Used
Variable End-Position Tuning
Dial in the exact retract stop from 100 to 150 mm during machine setup to accommodate varying material thicknesses without external stop blocks.
Product Changeover
Quickly shift the effective stroke by up to 50 mm when switching between different product sizes on a packaging line, minimizing downtime.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX150-50 the Right Cylinder?
The 50 mm adjustment range lets you dial in the exact travel window between 100 and 150 mm on the fly. For fixed travel without commissioning tweaks, a standard SAI cylinder is simpler. Remember that the rear adjuster is a stop, not a lock; if you need fail-safe load holding without live air, select a SAIL or BSAI cylinder instead.
When replacing an ISO 15552 cylinder, match the 80 mm bore, 150 mm nominal stroke, 50 mm adjustment range, G3/8 port, and your required mounting interface. This SKU lacks the -S magnet, so it cannot host CMSE or DMSE sensors without modification. Although 150 mm is a moderate stroke, the 25 mm rod and M20x1.5 thread handle side loads well, but always guide the load externally to prevent binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX150-50 FAQ
At the maximum 1.0 MPa pressure, it can deliver up to 513 kgf.
A rear external stopper screw lets you shorten the nominal 150 mm stroke by up to 50 mm, creating an adjustable travel window between 100 and 150 mm. This stopper only sets the end position; it does not lock or hold the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80AX150-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.